Home > Chimney Coating >

High Performance Chimney Coating Corrosion Protection Paint Liquid Type

Product Categories

Liyang Kangdawei Industrial Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

High Performance Chimney Coating Corrosion Protection Paint Liquid Type

Ask Lasest Price
Brand Name :	Lianti
Model Number :	KDW-116/KDW-982/KDW-987
Certification :	ISO9001
Supply Ability :	10 Ton/Tons per Month

Add to Cart

Product Details
Company Profile

High Performance Chimney Coating Corrosion Protection Paint Liquid Type

Product Show

Product Details

Performance

Through in-depth and detailed understanding and research on chimney desulfurization anti-corrosion engineering, and cooperation with domestic well-known colleges and universities, our company developed a specialized product -- chimney anti-corrosion masonry rubber. The product is divided into component A and B, adopts silicone as the main material, with excellent weather resistance, high temperature resistance, acid resistance and fire resistance, which can fully meet the technical requirements of anti-corrosion to the power plant chimney, and has been widely used.

Application

Inner wall of chimney in the power plant.

Feature

1. KDW-116 (Prime coating):
Low viscosity, easy to spray, excellent adhesion performance, easy to use and cured fast at room temperature.

2. KDW-982 (Chimney anti-corrosion masonry rubber):
With good thixotropy, easy to operate, the rubber would not flow when operated on the facade. Whether component A and B mixed evenly could be confirmed by the change in color, it is easy to control during the construction. It is convenient to add component B, the on-site operation is simple, according to the different season and construction site condition, it is convenient to change the ratio of component A and B and control the operation time after mixing, which meet the requirements of construction and curing time.

3. KDW-987 (Chimney anti-corrosion interface rubber):
With modest viscosity, not easy to flow, easy to smear and use. The product will cure at room temperature, no strings attached, cured into elastomer by absorbing moisture in the air.

Key performance indicators of KDW-116
Number	Item	Units of measurement	Performance	Test method
1	Adhesive strength(coating to steel) (coating to adhesive)	Mpa	≥1	GB/T 16777
2	Temperature resistance	℃	≥180	GB/T 16777
3	Completely curing time	h	≤4.0	GB/T 16777

Key performance indicators of KDW-982
Item		Unused		Used	Test method
		A	B
Uncured	Appearance & color	White/gray paste	Black paste	Black paste	Visual
	Density(g/cm³)	1.3~1.5	1.08	1.3~1.5	GB/T13477.2
Operation time (h)		1~2			-
Curing time (25℃, h)		24~48			-
Cured	Tensile strength (Mpa)	≥2.0			GBT/528 Dumbbell I type, 500mm/min
	Elongation (%)	≥100			GBT/528 Dumbbell I type, 500mm/min
	Shore hardness (A)	40~60			GBT/531
	Shear strength (Mpa)	≥1.5			GBT/7124 5mm/min, steel to steel
	50℃, 5% vitriol soak for 7 days (%)	No significant change on appearance, retention rate of tensile strength ≥80			GBT/528 Dumbbell I type, 500mm/min
	Heat resistance (180℃, 24h)	No significant change on appearance, retention rate of tensile strength ≥90			GBT/528 Dumbbell I type, 500mm/min
	80℃, 7 days, acid corrosion resistance to the mixture composed of 2% vitriol, 0.1% hydrochloric acid, 0.1% nitric acid and 0.1% phosphoric acid (%)	No significant change on appearance, retention rate of tensile strength ≥65			GBT/528 Dumbbell I type, 500mm/min
	Adhesive strength (steel to steel) (Mpa)	≥1.0			GB/T50212

Key performance indicators of KDW-987
Item		Performance	Test methods
Uncured	Appearance & color	Black paste	Visual
	Density (g/cm³)	1.2~1.4	GB/T13477.2
	Tack free time (min)	10~30	Touch method
Cured	Tensile strength (Mpa)	≥2.0	GB/T 528 Dumbbell I type, 500mm/min
	Elongation (%)	≥200	GB/T 528 Dumbbell I type, 500mm/min
	Shore hardness (A)	30~50	GB/T 531
	Shear strength (Mpa)	≥1.5	GB/T 7124 5mm/min, steel to steel
	80℃, 20% vitriol soak for 7 days (%)	No significant change on appearance, retention rate of tensile strength ≥65	GB/T 528 Dumbbell I type, 500mm/min
	Heat resistance (180℃, 48h)	No significant change on appearance, retention rate of tensile strength ≥90	GB/T 528 Dumbbell I type, 500mm/min
	80℃, 14 days, acid corrosion resistance to the mixture composed of 2% vitriol, 0.1% hydrochloric acid, 0.1% nitric acid and 0.1% phosphoric acid (%)	No significant change on appearance, retention rate of tensile strength ≥70	GB/T 528 Dumbbell I type, 500mm/min
	Adhesive strength (steel to steel) (Mpa)	≥1.0	GB/T 50212

Packing

1. KDW-116:10KG/iron drum;

2. KDW-982:

Component A: drum, 25KG/drum

Component B: sausage, 0.4KG/sausage;

plastic tube, 0.33KG/tube;

3. KDW-987: 25KG/plastic drum

Storage and transportation

Stored in the sealed containers, the temperature should not be higher than 28℃, and the shelf life would be 9 months in sealed at 23~25℃.

Operation process

1. KDW-116 (Prime coating):

1) Clean the surface:
Clean the surface of chimney inner wall as general surface, remove dust and greasy dirt.

2) Sizing:

Take the prime coating out of the package, spray it on the surface of chimney inner wall with professional spraying tools, and just dried at room temperature.

2. KDW-982 (Chimney anti-corrosion masonry rubber):

1) Mix rubber:

The recommended ratio is 10:1(component A: component B), and the operation time would be 1 hour when the operation temperature is 25℃. Increasing or decreasing the amount of component B within ±15% to speed up or slow down the curing speed.
2) Stir:
Completely stir the rubber with electric tool or other stirrer, the mixed rubber should be black, if it is white or too shallow, or local color is too deep, it is needed to stir until evenly colored.
3) Paste:
Evenly smear the mixed chimney anti-corrosion rubber on foam glass bricks or light vitreous tiles, ensure that the thickness of rubber between bricks and chimney inner wall is not less than 3mm and the thickness between bricks is not less than 1mm.

3. KDW-987 (Chimney anti-corrosion interface rubber):

1) Clean the surface:
Clean the surface of chimney inner wall as general surface, remove dust and greasy dirt.
2) Sizing:
Take the rubber out of package, smear smoothly the rubber on the surface of chimney inner wall with professional tools, let it cured at room temperature.
3) Cure:
The product is cured at room temperature, and it is solidified into elastomer by absorbing moisture in the air, whether completely cured depends on the thickness. (2~3mm thickness, at 25℃, humidity of 50%, it could be completely cured within 24 hours)

Company Profile

Production Scene

Exhibition

Payment

Service Team

Product Tags:


*From:	Your email address is incorrect!
*To:	Liyang Kangdawei Industrial Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!