| Sign In | Join Free | My burrillandco.com |
|
Liyang Kangdawei Industrial Co., Ltd.
2 Years
| Ask Lasest Price | |
| Brand Name : | Lianti |
| Model Number : | KDW-3582(1:1) |
| Certification : | ISO9001 |
| Price : | $9.30(1 - 99 Kilograms) $8.00(>=100 Kilograms) |
High thermal conductivity resistance to water used in putty led circuit board potting material for electronics
KDW-3582(1:1) is used on all kinds of componets of potting sealing and protection. It can be deeply cured, and with good liquidity, UV resistance, weather resistance, rain resistance and dirt resistance after mixed. And it can serve for a long time on outdoor products of fixation, waterproof, dustproof and anticreep.
Application:
1. Automotive electronics module
2. Power control module
3. Solar panels junction box LED screen
4. LED wall washer, LED module, etc
Feature
1. Two components silicone pouring compound, additional type
2. Low viscosity, easy to process, strong maneuverability
3. Low shrinkage rate, no corrosion, no stress
4. Excellent high temperature electrical insulation, thermal
conductivity and stability
5. Good waterproof and dampproof performance
1. Weighing component A and B according to the ratio of 1:1,
stirring evenly after mixed, then inject it to components and
module which needed to be potting protected. It would be better to
injected along one side of the wall, which can reduce the
generation of air bubbles.
2. Placing the sealed component, and it would discharge bubbles by
itself, if possible, vacuumizing and defoaming the mixed rubber
before potting sealing. Directly cured at room temperature, usually
the rubber will have elasticity within 1-6 hours.
Storage and transportation:
1. Avoid light, heat, and keep sealing(could be transported and
stored as non-dangerous goods )
2. Both shelf life are 1 year at 25℃
Packing:
Component A: 25KG, plastic drum;
Component B: 25KG, plastic drum;
also can be customized.
|
|
